• Home
  • Portfolio
    • Work
    • Resume
    • Linked In
  • shop
  • Contact
    • about
    • send a message
    • Social
      • Linked In
      • Instagram
      • Pinterest

CINDY LACKEY

DESIGNER

Copper Triangle + Ikea Malm Dresser Hack

xx_final

I am so excited to reveal this super easy Ikea Malm Dresser hack I’ve been thinking about for ages now. Our dresser got a little banged up during its trip over the Atlantic which gave me the perfect excuse to get crafty on it.

You know I’m addicted to copper and I love how the tone is reflected in the Rand McNally world map tacked right above. It also repeats the copper in the Ikea hacked Ekby Gällö shelves and in our desks (to be revealed soon!).

This diy is so easy, it’s all about the contact paper and keeping clean lines.

02_materials

 

Materials:

Malm dresser from Ikea

2 rolls copper contact paper (buy um both at the same time. I didn’t and I have slight color variations that I have decided are now part of the look)

construction paper or scrap template making paper

cutting board

straight edge

xacto knife

masking tape

03_tomake-top

Make sure to dust and clean everything really well. I was able to re-position a few times with out too much of an issue. Try to avoid creasing the paper, though, it has a foil quality. Remove the backing and smooth the contact paper as you go. Check the backing for more instructions on how to adhere the contact paper cleanly.

For the top, adhere the contact paper at the side edge of the dresser top keeping the long edge of the contact paper flush with the back of the dresser. You will need to runs to cover the top, just but them together. The seam should blend with the grain of the contact paper. (My seam is so clearly noticeable in the photos because I didn’t buy my contact paper all at the same time and there is a color variation. It’s not that noticeable in the rl so I let it be)

Make a good hard crease at the edge and front of the top. After I was done some bubbles popped up right along the edge. I very carefully ran my xacto knife along the edge to create a clean score then pushed the bubbles out as cleanly as I could. It’s still not 100% profess (see the pic above) but the shine actually helps hide a lot of the bubbling at the corners.

03_tomake-triangles

I made a couple templates out of construction paper and stuck um to the dresser with masking tape so I could play with a few triangle sizes. Then I used the final template to cut the contact paper triangles. I just cut my nails so I used masking tape to help me get the backing off the contact paper. And they just stick on like the top. Easy as pie!

04_done-diptic

 

04_done

The metallic contact paper has such a great shine. I love the Africa meets mod meets Southwest feel. Cheers!

Ikea Hack + Ekby Gällö Shelves

title-collage1

Well, hello there. I’ve taken a little Spring break from this blog to finish setting up house. But now it’s time to show you all when I’ve been up to!

Everyone loves a good Ikea hack so for our fist post back here is my hack of the Ekby Gällö / Ekby Tryggve shelving system.

IMG_6631_mod

I’ve always dreamed of having a full wall of shelves to display all my books and things. I was inspired by the look of the Eames House bookshelves with all their quirky collections displayed for the world. I’ve been seeing a lot of leather strap bookshelves trending, and I like the natural rustic look but I wanted something sturdier. Oh and you have to check out this awesome upside down shelf DIY from Mandi at Vintage Revivals. She’s so awesome.

When I spotted these Ekby shelves at Ikea I thought they looked kinda like ropes wrapped to hang the shelves and I like that they make that geometric triangle at the top (which also comes in handy for resting books against). But the white is so boring the whole bracket gets lost on a white wall. You know I am so obsessed with metallics and with a bit of copper spray paint those geometric details are ready to shine!

IMG_6644_mod

 

What I Used:

(Please note that what you use will very depending on wall type. Please consult your local hardware store to pick out what tools will work best for your install)

– Ikea Ekby Gällö / Ekby Tryggve shelving system (I installed (8) 119cm x 29cm deep bracket supports and (12) matching plain wood shelves)

– 16 heavy duty Molly Bolts (2 per bracket support) for your wall (our wall was double thick gypsum)

– Molly Bolt setting tool (for smashing in the bolt super well with the cutest little bird face! See the image below. I made him talk with a little bird voice while B did all the heavy drilling work. I recommend keeping your drilling buddy entertained similarly)

– Drill + Bits (for your wall and bolt size)

– Stud Finder (with electrical detection)

– Laser Level

– Measuring Tape

– Copper Spray Paint (I used 1 1/2 can of 600ml) (edit: Krylon also makes a great general purpose metallic spray paint)

– Martha Stewart Multi-Surface Metallic Acrylic Craft Paint in Copper (for touch ups) (edit: link)

tools-collage1

For the hanging part: Follow Ikea’s directions and rely heavily on your helpful hardware store man. We made at least 4 trips to our local hardware store and the Clas Ohlson to make sure we had all the correct supplies for our install. We hung our brackets within 70 cm of each other in order to create a stable span of the 119 cm length of each board safely as per the Ikea instructions. Measure twice and drill once to avoid filling a lot of holes or having your whole beautiful wall tumble to the ground.

spray-collage1

For the spraying part: Make yourself a nice little spray area out side for all the bracket supports. We just moved so I had quite a bit of boxes and packing material on hand and just used that. I made sure to keep all the pieces as close together, without touching, so I wouldn’t waste too much paint.

Now, I can not say this enough: spray paint in a well ventilated area! Use a mask and gloves because the metallic paint can really irritate your hands and throat (note my pre-gloved hand 2 minutes before it started itching like crazy). As with all painting, I recommend 3-4 light coats. It takes longer but you won’t get big drips. Patience is a virtue. Try taking chocolate breaks between coats, I think it helps.

The paint took about 24 hours to totally cure, which I found out the hard way when I tried to carry all the pieces back upstairs after they had only dried for an hour. Oops. This is where the MS metallic paint comes in handy. After 72 hours the paint is fully cured (but check your spray can for specifics!).

IMG_6635_mod

I expect the item layout to be pretty fluid but I think this is a good starting point. It drives my dear best friend (with her masters in literature) completely nuts that I’ve arranged our books haphazardly by subject (ish) and color, but I love it! And as long as I know where to find everything, it’s cool right?

 

IMG_6636_mod

I am so totally in love with how this project turned out! It’s really got this great American Southwest cabin retreat vibe. It completely anchors the whole living room as the focal wall, diverting attention from our overwhelmingly large cat tree (the focus of our last apartment’s living room) and the flat screen TV. All our games are within reach for when company stops by or we get board on Sunday night.

IMG_6624 copy_mod

Stay tuned for more Ikea hacks in this room and the full house tour still to come. I can’t wait to show you everything I’ve been up to!

about

Hello! I’m an interior, user experience, and graphic designer with a love for purpose-driven minimalism. I am also a digital nomad originally from California, currently living in Barbados, by way of Colorado, with my husband and our two cats.

FOLLOW ALONG

  • Instagram
  • LinkedIn
  • Pinterest

just what you’re looking for

© Cindy Lackey | Site design handcrafted by Station Seven